GMC

GMC Canyon Bed Sizes & Dimensions

Inside bed length, width between the wheel wells and depth for the GMC Canyon, 2015 to today — plus which camper shells and tonneau covers swap between years. The current truck comes with 5'2" beds.

2023–present Canyon

Verified 2026
BedCabsLength
at floor
Max widthBetween
wheel wells
DepthVolume
Short Box
5'2" nominal
Crew Cab 61.7″58.2″45.5″— 41.9 ft³
2023–present Canyon · Crew Cab · 61.7-in bed Labels match the measurements on this page. Illustration only, not a manufacturer drawing. Trim, wheel-well shape and tailgate details may differ from your truck. View full sheet

Camper shell & cover swaps

Same bed box as:

A shell from one of these trucks with the same bed length should sit on the rails, but cab height, back-window angle, tailgate type and rail caps can still stop it from fitting. Confirm with the shell maker before you buy.

Compare this bed →

Cab height above the bed rail

Estimated ≈ 19.5″ (49.5 cm) Estimate

Likely range 18″ (45.7 cm) – 21″ (53.3 cm). Average of the midsize pickups on file (Tacoma, Ranger, Gladiator). The 2023+ trucks are taller overall than the previous generation.

This number is an estimate worked out from measurements of similar trucks, not from GMC's specifications. We can't guarantee it's correct, so measure your truck before buying a shell. Measured yours? Send it and we'll replace the estimate.

  • Crew Cab / short box only in this generation.
  • Bed length matches the 2015–2022 short box, but the bed sides and rails changed — confirm with the shell maker before swapping.

2015–2022 Canyon

Spot-check
BedCabsLength
at floor
Max widthBetween
wheel wells
DepthVolume
Short Box
5'2" nominal
Crew Cab 61.7″57.8″44.4″19.1″ 41.3 ft³
Long Box
6'2" nominal
Extended Cab, Crew Cab 74″57.8″44.4″19.1″ 49.9 ft³
2015–2022 Canyon · Crew Cab · 61.7-in bed Labels match the measurements on this page. Illustration only, not a manufacturer drawing. Trim, wheel-well shape and tailgate details may differ from your truck. View full sheet

Camper shell & cover swaps

Same bed box as:

A shell from one of these trucks with the same bed length should sit on the rails, but cab height, back-window angle, tailgate type and rail caps can still stop it from fitting. Confirm with the shell maker before you buy.

Compare this bed →

Cab height above the bed rail

Estimated ≈ 19″ (48.3 cm) Estimate

Likely range 17.5″ (44.5 cm) – 21″ (53.3 cm). Average of the midsize pickups on file (Tacoma about 19.5 in, Ranger about 19 in), adjusted for this truck's 19.1-in bed depth.

This number is an estimate worked out from measurements of similar trucks, not from GMC's specifications. We can't guarantee it's correct, so measure your truck before buying a shell. Measured yours? Send it and we'll replace the estimate.

Owner fit reports

Add yours

Swapped a shell, fit a tonneau, or measured your bed? Tell other owners what worked. Approved reports appear here.

All Canyon reports →